Welcome to Our Online Store

Prime Caravan Breakers is proud to offer British’s largest range of caravan and camping accessories to all regions across the country

Surejust 6L, 12v and 230v water heater (inc 1/2 inch barbs)

Original price was: 580.00£.Current price is: 520.00£.

Product Name: Surejust 6L Water Heater – Dual Voltage 12V & 230V

Product Type: Dual-Mode Electric Water Heater

Capacity: 6 liters

Heating Options:

  • 12V DC: Low-voltage heating for use with vehicle batteries or off-grid systems
  • 230V AC: Standard mains electricity for rapid water heating

Function:

  • Provides hot water for caravans, motorhomes, boats, and off-grid installations
  • Dual-voltage operation ensures flexibility depending on available power source
  • Compact design suitable for small spaces and mobile environments

Water Connections:

  • Includes ½ inch barb fittings for easy plumbing connection
  • Compatible with standard flexible hoses in RV and marine applications

Temperature Control:

  • Adjustable thermostat for selecting desired water temperature
  • Maximum operating temperature: approximately 60–65°C

Construction & Materials:

  • Tank: Corrosion-resistant stainless steel or coated alloy for long-term durability
  • Insulation: High-performance thermal insulation for minimal heat loss
  • Heating elements: Durable 12V DC and 230V AC elements

Electrical Specifications:

  • 12V DC: 200–250W (vehicle/battery operation, suitable for mobile use)
  • 230V AC: 500–600W (mains electricity, faster heating)
  • Fusing recommended per manufacturer instructions for safety

Safety Features:

  • Overheat protection via built-in thermostat
  • Pressure relief or safety valve to prevent overpressure
  • Compliant with relevant CE and safety standards

Dimensions (approx.):

  • Height: [Insert dimension]
  • Width: [Insert dimension]
  • Depth: [Insert dimension]

Weight: [Insert weight]

Installation Requirements:

  • Must be installed according to manufacturer instructions
  • Electrical connections should be performed by a qualified technician
  • Can be mounted in wall compartments, under sinks, or near water outlets

Applications:

  • Motorhomes, caravans, boats, cabins, and off-grid setups requiring compact, dual-voltage water heating
  • Suitable for mobile or stationary use where 12V or 230V is available

Warranty: Manufacturer warranty applies; verify with local supplier for duration and terms

Truma iNet X Panel Central Control Unit for Appliances

Original price was: 320.00£.Current price is: 299.00£.

Product Name: Truma iNet X Panel – Central Control Unit

Product Type: Smart Control Panel for Truma Appliances

Function:

  • Centralized interface to monitor, control, and manage Truma appliances in caravans, motorhomes, and boats
  • Allows users to control heating, hot water, and air-conditioning appliances from a single unit
  • Supports smart, app-based remote control via Truma iNet X App

Compatibility:

  • Works with Truma iNet X-enabled appliances including:
    • Truma Combi heaters
    • Ultrastore and Rapide water boilers
    • Truma Aventa air conditioning units
  • Integrates seamlessly with Truma’s iNet X ecosystem

User Interface:

  • Touchscreen panel with intuitive menus
  • Digital display showing temperature, operational status, and error messages
  • Easy-to-use interface for setting schedules, temperature, and appliance modes

Connectivity:

  • Wireless connection to Truma iNet X appliances
  • App support via smartphone or tablet for remote monitoring and control
  • Can link multiple appliances for integrated system management

Key Features:

  • Central control of multiple Truma appliances from one interface
  • Smart scheduling for heating and water systems
  • Real-time system status and fault reporting
  • Integration with Truma iNet X App for remote control and alerts
  • Multi-language support

Construction & Environmental Specifications:

  • Compact and durable design suitable for mobile environments
  • Operating temperature: –20°C to +50°C
  • Vibration-resistant and suitable for caravan/motorhome/boat installation

Installation Requirements:

  • Must be installed according to Truma iNet X installation guidelines
  • Connection to compatible Truma appliances required for full functionality
  • Designed for mounting in vehicle cabins, dashboards, or dedicated control panels

Dimensions (approx.):

  • Height: [Insert dimension]
  • Width: [Insert dimension]
  • Depth: [Insert dimension]

Weight: [Insert weight]

Applications:

  • Motorhomes, caravans, boats, and mobile dwellings with Truma iNet X-enabled appliances
  • Ideal for centralized, smart, and user-friendly appliance management

Warranty: Manufacturer warranty applies; check with local supplier for details

Truma Ultraheat Control Panel

Original price was: 135.00£.Current price is: 122.00£.

Product Name: Truma Ultraheat Control Panel

Product Type: Central Control Panel for Truma Ultraheat Heating Systems

Function:

  • Provides centralized control and monitoring of Truma Ultraheat heating systems
  • Allows users to set and adjust room and water temperatures in caravans, motorhomes, and boats
  • Displays system status, operational modes, and fault alerts for safe and efficient operation
  • Interfaces with Truma heating appliances to optimize energy use

Key Features:

  • Digital display for clear visualization of temperature, mode, and system status
  • Intuitive button or touchscreen interface for easy operation
  • Adjustable heating levels for comfort and energy efficiency
  • Provides system feedback including error codes, maintenance alerts, and operational indicators
  • Compatible with other Truma iNet X-enabled appliances for integrated system management
  • Multi-language support for international applications
  • Sleek, compact design for dashboard or wall mounting

Electrical Specifications:

  • Operating Voltage: 12V DC or 24V DC (depending on vehicle installation)
  • Power Consumption: Low standby and operational power
  • Communication: Wired interface to Truma Ultraheat heater units
  • Control Signals: Sends commands for heating, fan speed, and temperature set points

Safety Features:

  • Integrated fault detection and alarm notifications
  • System error codes displayed for rapid troubleshooting
  • Overtemperature protection when connected to Ultraheat units
  • Designed to comply with Truma safety standards for mobile heating systems

Construction & Environmental Specifications:

  • Robust and vibration-resistant housing for mobile environments
  • Operating Temperature: –20°C to +50°C
  • Compact design suitable for dashboard, wall, or dedicated panel mounting
  • Resistant to dust and moisture typical of mobile applications

Installation Requirements:

  • Must be connected to a compatible Truma Ultraheat heating system
  • Installation per Truma guidelines for correct wiring and operation
  • Accessible location recommended for user interface

Applications:

  • Motorhomes, caravans, boats, and mobile dwellings requiring efficient and user-friendly heating control
  • Integration with Truma iNet X system for centralized appliance management
  • Enables precise comfort settings and system monitoring

Compliance:

  • CE certified
  • Conforms to relevant mobile heating system standards

Dimensions (approx.):

  • Height: [Insert dimension]
  • Width: [Insert dimension]
  • Depth: [Insert dimension]

Weight: [Insert weight]

Warranty: Manufacturer warranty applies; verify with local supplier for details

Victron 150/70-TR SmartSolar MPPT Charge Controller/Regulator (70A)

Original price was: 620.00£.Current price is: 550.00£.

Product Name: Victron SmartSolar MPPT Charge Controller/Regulator – 150/70-TR

Product Type: Maximum Power Point Tracking (MPPT) Solar Charge Controller

Model: 150/70-TR

Rated Charge Current: 70 Amps

Maximum PV Input Voltage: 150V DC

Function:

  • Regulates power from solar panels to charge batteries efficiently
  • Implements MPPT (Maximum Power Point Tracking) for optimal solar energy harvesting
  • Protects batteries against overcharging, under-voltage, and reverse current
  • Enables remote monitoring and configuration via VictronConnect app

Battery Compatibility:

  • Lead-acid (Flooded, Gel, AGM)
  • Lithium-ion (LiFePO4)
  • Compatible with 12V, 24V, 36V, or 48V battery systems (automatic detection and configuration)

Efficiency & Features:

  • High-efficiency MPPT tracking (up to 99% conversion efficiency)
  • Rapid response to changing sunlight conditions
  • Integrated VE.Direct communication port for monitoring and setup
  • SmartBattery management for increased battery lifespan
  • Multiple load output options with programmable settings

Protection Features:

  • Overvoltage and overcurrent protection
  • Reverse polarity protection (PV and battery)
  • Temperature-compensated charging
  • Short-circuit and thermal overload protection

Connectivity & Monitoring:

  • VictronConnect App support via VE.Direct for smartphone or tablet
  • Compatible with VRM portal for remote monitoring and data logging
  • Optional Ethernet or Bluetooth modules for networked monitoring

Construction & Environmental Specs:

  • Compact, rugged, and durable housing
  • Operating temperature: –30°C to +60°C
  • IP43 (indoor/outdoor protection, limited dust ingress, splash-proof)
  • Fanless, passive cooling for silent operation

Dimensions (approx.):

  • Height: 100 mm
  • Width: 150 mm
  • Depth: 55 mm

Weight: ~1.4 kg

Applications:

  • Solar power systems in caravans, motorhomes, boats, cabins, and off-grid dwellings
  • Residential and small commercial solar installations requiring high-efficiency MPPT charge regulation

Warranty: Manufacturer warranty applies (check local supplier for duration and terms)

Victron Battery Protect BP220 (220 Amp / M8 Stud)

Original price was: 125.00£.Current price is: 110.00£.

Product Name: Victron Battery Protect BP220

Product Type: High-Current DC Battery Protection Device

Function:

  • Protects batteries from over-discharge and overvoltage by disconnecting the battery from loads or charging sources
  • Ideal for high-current 12V or 24V battery systems in mobile, marine, and off-grid applications
  • Prevents battery damage and extends battery life by avoiding excessive discharge

Key Features:

  • Disconnects loads to prevent over-discharge of batteries
  • Reconnects automatically when battery voltage recovers
  • Works for 12V and 24V battery systems (automatic detection)
  • High-current rated: 220A continuous with M8 stud connections
  • Adjustable voltage thresholds for low-voltage disconnect and reconnect
  • Manual override function for emergency operation
  • Can protect both primary and auxiliary batteries

Electrical Specifications:

  • Maximum Continuous Current: 220A
  • Surge Current: Up to 400A (short-term, depending on installation)
  • Nominal Voltage: 12V or 24V DC (auto-detect)
  • Voltage Disconnect Threshold: Adjustable, typically 10–12V (12V system) / 20–24V (24V system)
  • Voltage Reconnect Threshold: Adjustable, typically 12–13V (12V system) / 24–26V (24V system)
  • Reverse Polarity Protection: Yes
  • Quiescent Current: <1 mA

Safety Features:

  • Overcurrent protection with internal high-current fuse
  • Short-circuit protection
  • Reverse polarity protection
  • Thermal protection to prevent overheating
  • LED status indicator for on/off state and fault conditions

Construction & Environmental Specifications:

  • Rugged, compact housing for mobile and off-grid environments
  • Mountable on bulkhead or panel
  • Operating Temperature: –40°C to +50°C
  • Vibration and shock resistant for automotive, marine, and RV applications

Connectivity & Installation:

  • M8 stud connections for high-current wiring
  • Manual override switch for emergency bypass
  • Can be used in series with battery or load circuits
  • Installation must follow Victron wiring guidelines to ensure safety and optimal performance

Applications:

  • Motorhomes, caravans, boats, and off-grid battery systems
  • Protects high-current lithium-ion, AGM, gel, or lead-acid batteries
  • Ideal for auxiliary or service batteries in mobile energy systems

Compliance:

  • CE certified
  • Meets relevant international standards for battery protection devices

Dimensions (approx.):

  • Height: 130 mm
  • Width: 65 mm
  • Depth: 40 mm

Weight: ~0.4 kg

Warranty: Manufacturer warranty applies; check local supplier for details

Victron BMS 12-200 Battery Management System

Original price was: 250.00£.Current price is: 220.00£.

Product Name: Victron BMS 12-200

Product Type: Battery Management System (BMS)

Function:

  • Protects and manages lithium-ion battery banks in mobile, off-grid, and stationary energy systems
  • Monitors cell voltages, battery temperature, and state-of-charge (SOC) to ensure safe operation
  • Provides overvoltage, undervoltage, overcurrent, and temperature protection
  • Communicates with connected inverters, chargers, and other system components for integrated system control

Key Features:

  • Compatible with 12V nominal lithium-ion (LiFePO4) battery banks
  • Maximum continuous current: 200A (suitable for high-power applications)
  • High-current relay for safe isolation of battery from loads or chargers
  • Overcurrent and short-circuit protection
  • Thermal management via temperature sensors
  • CANbus and VE.Direct communication for integration with Victron devices
  • Remote monitoring and control via VictronConnect app or GX system (Color Control GX, Venus GX, etc.)

Electrical Specifications:

  • Nominal Battery Voltage: 12V LiFePO4
  • Maximum Continuous Current: 200A
  • Peak Current (for short durations): [Check manufacturer datasheet]
  • Operating Voltage Range: 9–16V
  • Communication Ports: VE.Direct, CANbus

Safety Features:

  • Overvoltage protection
  • Undervoltage protection
  • Overcurrent and short-circuit protection
  • Temperature monitoring and shutdown to prevent overheating
  • Automatic disconnect in case of fault conditions

Construction & Environmental Specifications:

  • Robust housing for durability in mobile and stationary applications
  • Operating Temperature: –20°C to +50°C
  • Vibration-resistant and suitable for use in motorhomes, boats, and off-grid installations
  • Wall or panel mountable

Dimensions (approx.):

  • Height: [Insert dimension]
  • Width: [Insert dimension]
  • Depth: [Insert dimension]

Weight: [Insert weight]

Applications:

  • 12V LiFePO4 battery banks in motorhomes, caravans, boats, and off-grid energy systems
  • Integrated with Victron inverters, chargers, and GX system devices for centralized monitoring and control
  • Protects batteries from misuse, overloading, or environmental extremes

Compliance:

  • CE certified
  • Complies with relevant international battery management and safety standards

Warranty: Manufacturer warranty applies; check with local supplier for details

Victron Cyrix Li-charge 120 Li-ion Battery Combiner (VSR)

Original price was: 102.00£.Current price is: 95.00£.

Product Name: Victron Cyrix Li-Charge 120 Li-ion Battery Combiner (VSR)

Product Type: Voltage Sensitive Relay (VSR) / Battery Combiner

Function:

  • Automatically combines or isolates two 12V lithium-ion (LiFePO4) battery banks based on voltage thresholds
  • Ensures efficient charging of auxiliary batteries from a main battery or alternator without overloading the system
  • Protects batteries from over-discharge by isolating them when voltage drops below safe levels
  • Ideal for motorhomes, caravans, boats, and off-grid solar systems

Key Features:

  • Designed specifically for Li-ion (LiFePO4) batteries
  • Fully automatic operation; no manual switching required
  • Low-resistance contacts for minimal voltage drop and energy loss
  • High-current capability: 120A continuous current handling
  • Voltage-sensitive relay operation: closes when voltage rises above threshold, opens when voltage falls below threshold
  • Reverse polarity and short-circuit protected

Electrical Specifications:

  • Nominal System Voltage: 12V DC (suitable for 12.8V Li-ion battery banks)
  • Maximum Continuous Current: 120A
  • Peak/Surge Current: Up to 240A (short-term, <10s)
  • Operating Voltage Thresholds:
    • Connect Voltage: ~13.5V DC
    • Disconnect Voltage: ~12.8V DC
  • Voltage Drop: <30 mV at rated current
  • Quiescent Current: <10 mA

Safety Features:

  • Reverse polarity protection to prevent damage from incorrect installation
  • Short-circuit and overcurrent protection
  • Thermal shutdown in case of overheating
  • Automatic disconnection to protect batteries in low-voltage conditions

Construction & Environmental Specifications:

  • Rugged, vibration-resistant housing for mobile and marine use
  • Compact and lightweight design for panel or compartment mounting
  • Operating Temperature: –20°C to +50°C
  • Designed for environments with vibrations, shocks, and moderate moisture

Connectivity & Installation:

  • Direct connection to the positive terminals of both battery banks
  • Manual override option for emergency situations
  • Easy to install; requires proper fusing per Victron guidelines
  • Suitable for use with Victron BMS for full lithium battery management integration

Applications:

  • Combines main and auxiliary 12V Li-ion battery banks in caravans, motorhomes, and boats
  • Ensures safe charging of Li-ion batteries from alternators, solar controllers, or other DC sources
  • Off-grid or mobile energy systems requiring high-current battery combining
  • Smart charging systems integrated with Victron BMS

Compliance:

  • CE certified
  • Complies with relevant automotive, marine, and mobile electrical safety standards

Dimensions (approx.):

  • Height: 100 mm
  • Width: 50 mm
  • Depth: 35 mm

Weight: ~0.3 kg

Warranty: Manufacturer warranty applies; check with local supplier for details

Victron Cyrix Li-charge 230 Li-ion Battery Combiner (VSR)

Original price was: 180.00£.Current price is: 165.00£.

Product Name: Victron Cyrix-Li Charge 230 Li-ion Battery Combiner (VSR)

Product Type: Battery Combiner / Voltage Sensitive Relay (VSR) for Li-ion Batteries

Function:

  • Automatically combines or isolates two 12V Li-ion (LiFePO4) battery banks based on voltage thresholds
  • Ensures efficient charging of auxiliary batteries from a main battery or alternator without overloading the system
  • Prevents battery damage by isolating batteries when voltage drops below safe levels
  • Ideal for applications in motorhomes, caravans, boats, and off-grid systems

Key Features:

  • Designed specifically for lithium-ion batteries (LiFePO4)
  • Low resistance, fully automatic operation without manual switching
  • High-current capability: 230A continuous current handling
  • Voltage-sensitive relay operation: closes and opens based on preset voltage levels
  • Compact and lightweight design for easy installation
  • Reverse polarity protection and short-circuit safe

Electrical Specifications:

  • Nominal System Voltage: 12V DC (suitable for 12.8V Li-ion battery banks)
  • Continuous Current: 230A
  • Peak/Surge Current: Up to 400A (short-term)
  • Operating Voltage Range: 12–15.6V DC (adjustable thresholds for closing and opening)
  • Voltage Drop: <30mV at rated current for minimal power loss

Safety Features:

  • Overcurrent protection via internal fuse or system fuse
  • Automatic disconnection in low-voltage situations to protect battery banks
  • Reverse polarity protection to prevent damage during installation errors
  • High temperature protection and thermal shutdown

Construction & Environmental Specifications:

  • Rugged, vibration-resistant housing suitable for mobile and marine environments
  • Operating Temperature: –20°C to +50°C
  • Compact size for panel, wall, or compartment mounting

Connectivity & Installation:

  • Direct connection to positive terminals of both batteries
  • No control wiring required; fully automatic operation
  • Suitable for integration with Victron BMS and monitoring systems for additional safety

Applications:

  • Splitting main and auxiliary 12V Li-ion battery banks in caravans, motorhomes, and boats
  • Ensuring safe charging of Li-ion batteries from alternators, solar, or other DC sources
  • Off-grid or mobile energy systems requiring high-current battery combining

Compliance:

  • CE certified
  • Complies with relevant automotive and marine electrical safety standards

Dimensions (approx.):

  • Height: [Insert dimension]
  • Width: [Insert dimension]
  • Depth: [Insert dimension]

Weight: [Insert weight]

Warranty: Manufacturer warranty applies; check with local supplier for details

Victron Digital Multi Control Panel 200A for MultiPlus & Quattro

Original price was: 172.00£.Current price is: 155.00£.

Product Name: Victron Digital Multi Control Panel 200A

Product Type: Remote Control and Monitoring Panel for MultiPlus & Quattro Inverters/Chargers

Function:

  • Provides remote control, monitoring, and configuration of Victron MultiPlus and Quattro inverter/charger units
  • Allows control of AC input, output, and charging functions from a convenient location
  • Monitors system parameters including AC current, AC voltage, battery voltage, and load power
  • Provides quick access to system settings for power management and operational modes

Key Features:

  • Digital interface with LCD display for clear status visualization
  • Configurable AC input and output switching for flexible system management
  • Adjusts charge current for battery optimization
  • Monitors system parameters: AC voltage, AC current, battery voltage, load power, and inverter status
  • LED indicators for system alarms and warnings
  • Supports remote programming of MultiPlus and Quattro units
  • Easy integration with Victron GX devices for advanced system monitoring and logging

Electrical Specifications:

  • Rated DC Battery Current: Up to 200A (suitable for MultiPlus & Quattro systems)
  • Input Voltage: 12V or 24V DC (depending on MultiPlus/Quattro system)
  • Communication Ports: VE.Bus interface for connection to MultiPlus/Quattro units
  • AC Control: On/off switching of inverter/charger AC input and output
  • Max Cable Length to Inverter: Per Victron installation guidelines (typically up to 25m)

Safety Features:

  • Automatic protection against overcurrent or improper connection
  • Fault and alarm indications for system errors or abnormal conditions
  • Overvoltage and undervoltage detection for battery and AC systems

Construction & Environmental Specifications:

  • Rugged housing for mobile and marine environments
  • Mountable in panels, dashboards, or control cabins
  • Operating Temperature: –20°C to +50°C
  • Vibration-resistant and designed for caravans, motorhomes, boats, and off-grid installations

Installation Requirements:

  • Connects via VE.Bus to MultiPlus or Quattro units
  • Must be installed per Victron installation guidelines by a qualified technician
  • Panel can be mounted up to 25m from inverter/charger (verify for cable sizing and voltage drop)

Applications:

  • Central control and monitoring of MultiPlus and Quattro inverter/charger systems
  • Mobile energy systems in motorhomes, caravans, and boats
  • Off-grid solar or hybrid power installations requiring remote monitoring and load management
  • Configurable for AC input prioritization and battery charging optimization

Compliance:

  • CE certified
  • Complies with international standards for mobile and off-grid electrical systems

Dimensions (approx.):

  • Height: [Insert dimension]
  • Width: [Insert dimension]
  • Depth: [Insert dimension]

Weight: [Insert weight]

Warranty: Manufacturer warranty applies; verify with local supplier for details

Victron VE.Bus BMS Battery Management System

Original price was: 140.00£.Current price is: 125.00£.

Product Name: Victron VE.Bus BMS (Battery Management System)

Product Type: Battery Management System (BMS) for Lithium-Ion Batteries

Function:

  • Protects and manages lithium-ion (LiFePO4) battery banks in systems using Victron MultiPlus, Quattro, or other VE.Bus inverters/chargers
  • Monitors battery voltage, current, state-of-charge (SOC), and temperature to ensure safe operation
  • Provides overvoltage, undervoltage, overcurrent, and thermal protection
  • Communicates with VE.Bus devices to enable automatic inverter/charger control and battery protection

Key Features:

  • Compatible with Victron lithium-ion battery packs and VE.Bus-enabled devices
  • Automatically controls inverter and charger operation to prevent battery over-discharge or overcharge
  • Supports multiple operational modes including charge-only, discharge-only, and full VE.Bus integration
  • Monitors and logs critical battery parameters
  • Compatible with VictronConnect app and GX system devices for remote monitoring and configuration
  • Compact and robust design for mobile and off-grid applications

Electrical Specifications:

  • Nominal Battery Voltage: 12V, 24V, 48V (depending on system configuration)
  • Maximum Continuous Current: Model-dependent, typically matched to inverter/charger ratings
  • Operating Voltage Range: [Check datasheet: typically 10–60V depending on system]
  • Communication Ports: VE.Bus interface for control and monitoring
  • Control Signal Outputs: VE.Bus signals to connected MultiPlus/Quattro inverters and chargers

Safety Features:

  • Overvoltage protection
  • Undervoltage protection
  • Overcurrent and short-circuit protection
  • Thermal shutdown in case of overheating
  • Automatic isolation of batteries in fault conditions
  • Integrates with inverter/charger to prevent battery misuse

Construction & Environmental Specifications:

  • Robust housing for vibration and shock resistance
  • Operating Temperature: –20°C to +50°C
  • Suitable for panel or compartment mounting in vehicles, boats, and off-grid installations

Installation Requirements:

  • Must be connected to VE.Bus-enabled inverters/chargers and lithium-ion battery packs
  • Installed by qualified personnel following Victron wiring guidelines
  • Ensure proper VE.Bus communication connections for full functionality

Applications:

  • Motorhomes, caravans, boats, and off-grid systems using Li-ion batteries
  • Integration with Victron MultiPlus and Quattro inverter/chargers for smart battery protection
  • Centralized monitoring and safe management of high-current lithium-ion battery banks

Compliance:

  • CE certified
  • Complies with international battery management and safety standards

Dimensions (approx.):

  • Height: [Insert dimension]
  • Width: [Insert dimension]
  • Depth: [Insert dimension]

Weight: [Insert weight]

Warranty: Manufacturer warranty applies; verify with local supplier for terms

Victron Venus GX System Monitor

Original price was: 290.00£.Current price is: 270.00£.

Product Name: Victron Venus GX

Product Type: Central System Monitor and Control Unit

Function:

  • Provides real-time monitoring and control of Victron energy systems including solar, batteries, inverters, and chargers
  • Acts as a central hub for integrating and managing multiple Victron devices
  • Enables remote monitoring and configuration via Victron VRM Portal or VictronConnect app

Key Features:

  • Monitors voltage, current, state-of-charge, and power flow across all connected devices
  • Displays detailed system status and logs historical data for performance analysis
  • Configures and controls Victron inverters, chargers, MPPT solar controllers, and battery monitors
  • Generates alarms and notifications for system faults or abnormal conditions
  • Supports remote access through Ethernet or optional Wi-Fi/Bluetooth connectivity
  • Multi-language interface for international use

Connectivity:

  • VE.Direct ports for connecting MPPT solar controllers
  • VE.Bus ports for connecting MultiPlus or Quattro inverters/chargers
  • Ethernet port for network connectivity and remote monitoring
  • Optional USB and CANbus connections for system expansion
  • Integration with VRM Portal for cloud-based remote monitoring and notifications

Compatibility:

  • Victron inverters and inverter/chargers (MultiPlus, Quattro)
  • Victron SmartSolar MPPT charge controllers
  • Victron BMV battery monitors
  • Other Victron GX devices (Color Control GX, Venus GX, etc.)

Construction & Environmental Specs:

  • Robust housing for durability in mobile and stationary environments
  • Operating temperature: –20°C to +50°C
  • Designed for panel or wall mounting
  • Passive cooling, vibration-resistant, suitable for off-grid, marine, and mobile applications

Dimensions (approx.):

  • Height: 165 mm
  • Width: 165 mm
  • Depth: 40 mm

Weight: ~0.5 kg

Applications:

  • Motorhomes, caravans, boats, off-grid cabins, and remote power systems
  • Centralized monitoring and management of DC/AC power systems
  • Integration of solar PV, batteries, inverters, and auxiliary devices for smart energy management

Safety & Compliance:

  • CE certified
  • Complies with relevant international safety standards for electrical and electronic equipment

Warranty: Manufacturer warranty applies; check with local supplier for details

4.8
Based on 16 Reviews
Amanda F.
Amanda F.
July 1, 2026
Nigel A.
Nigel A.
March 19, 2026
Paul W.
Paul W.
February 10, 2026
Henry D.
Henry D.
June 27, 2025
Chloe W.
Chloe W.
April 23, 2025
Linda B.
Linda B.
September 11, 2024
Peter K.
Peter K.
August 1, 2024
Sarah &.
Sarah &.
June 13, 2024
Steve M.
Steve M.
July 6, 2023
James C.
James C.
April 11, 2023
Robert H.
Robert H.
August 16, 2022
Patricia G.
Patricia G.
May 29, 2021
Geoff T.
Geoff T.
May 25, 2021
Susan C.
Susan C.
April 1, 2021
Margaret E.
Margaret E.
September 1, 2017
David M.
David M.
October 21, 2014
Get a Little Closer

Join Our Newsletter Now

Subscribe now to get early access to exclusive deals, news & recommendations along with access to our Camping World Rewards offering 3% cash back on every order.